Electric Buses – What Kind of Infrastructure Do They Need and How Does It Work?

Featured Image

An insight into EV charging of a different kind from EVSE Australia

While Australians are slowly picking up and transitioning to personal electric vehicles, the bus industry is following suit as well. But how do electric bus fleets operate? What do they need to stay charged, and how are these early adopters setting themselves up?

EVSE Australia has developed catered solutions for bus fleets to answer all of the above.

An electric bus on trial in NSW

Electric Bus Charging Australia

To start, an electric bus (or eBus) is the same as an electric car in the way that it uses a large battery and drivetrain, where a traditional vehicle would use a tank of fuel to power an engine. Charging an electric bus is mostly the same as an electric car as well. They’ll use a charging station and corresponding plug to recharge their battery. However, when charging buses, it’s important to consider their use case compared to standard EVs.

Buses get very high commercial usage rates, as one might imagine. That means less downtime to charge and get back out on the road. When thinking about the best solution for this, generally DC charging stations quickly become the go-to option for eBus fleet managers. That’s because they can bypass onboard chargers of EVs (they limit AC power rates to a max of 7kW or 22kW generally) to reach much faster charging rates. DC Chargers range from 20kW units all the way up to 350kW+! Using these high-powered solutions are perfect for when a bus sets down after finishing a route.

Electric Buses Charging Stations

As fleet sizes increase, managing the load of charging eBuses with huge batteries may also become difficult given their prolonged high power demands. Intelligent load management applications can work with EVSE’s intelligent DC charging range to ensure a building never exceeds its power supply. This is done by adjusting charging rates on different chargers in real-time depending on the total demand on the system. That also means that as fleet vehicles charge to full capacity overnight, the charge rate on systems still in use will be adjusted accordingly to increase as well.

It all might seem a little complicated – and that’s ok! The team of trained electric vehicle charging experts at EVSE would be happy to investigate your eBus fleet and find the best way to manage their charging.

Have a look at our Electric Bus Fleet page or get in touch with us at sales@evse.com.au or on 1300 406 210.

Share this Article

BMW continues its electric vehicle expansion with the sportier BMW i3S

First Look: BMW i3 and i3S Charging at a home near you soon One of EVSE’s all time favorite electric vehicles has just been updated, with BMW this week releasing information of its 2018 BMW i3 as well as the new version the BMW i3S. We are anticipating BMW’s launch of the new and always […]
Read More

VW e-golf to extend range by 30%

With the new generation cells this will push the e-golf’s range out to 180km, more than enough given the fact that the majority of Sydney commuters travel less than 100km a day. The E-golf is the entre to the eventual release of the VW ID electric car range. The VW charging stations will be able […]
Read More

Find the right charger

Tell us about your car and home to see recommendations.

Get the best price

Stocking the best Electric Car products from the World’s leading brands.

Reliability

All of our EVSE products are compliant with Australian & International standards.